Your position: Home / Home improvement / Shower Equipment / Shower System

Tecmolog Black Shower Combo Set Brass Body Wall Mounted Shower Systems with Rain Shower and Handheld, Shower Trim Kit with Rough-In Valve BB314B

Black Wall Mounted Shower Systems
    Please select the information you wantX
  • Ships From:
(10000 Piece available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Product Detail
  • Installation
  • Installation
  • Reviews(6)


*Square Rainfall Shower Head: High pressure rain shower head, extra large 7.8 inch face for shoulder-to-shoulder water flow coverage
*L Style Handheld Shower Head: High pressure hand held shower head, provides high water pressure and keeps the flow rate 2.5 GPM which will save 30% water
*Shower Mixer Valve: Rough in valve provides water at nearly constant temperature to a shower or bathtub, and prevents scalding injuries, in particular to the elderly and children
*Dual Function Brass Shower Trim: Single lever design for effortless flow and temperature control. You can switch the knob to open rain shower head or handheld shower head as you like (can not both together)
*The Shower System Set Included: Rainforest shower head, hand held shower head, shower valve body and trim, 14.8" shower arm, shower hose 1.5m, and shower holder

Name: Shower Combo System
Installation method: Wall mounted

Package Details:
Package Weight:11.9bounces(5388g)
Package dimensions:19.7*14.2*5.1inches(50*36*13cm)
Package Quality:1

Package list:
1 x 12 inches Fixed Shower Head (Brass)
1 x Hand Held Shower head (Brass)
1 x Shower Mixer Valve (Brass)
1 x Wall Mounted Shower Arm 14.8" (Stainless Steel)
1 x Shower Bracket Holder (Brass)
1 x Shower Hose 1.5m (Stainless Steel)
Shower Set Installation

Buyer Show Installation

How to Install Wall Mounted Shower System



Shower Set Installation

Buyer Show Installation


Before You Begin

1. Shut off the main water supply.
2. Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving the factory.
3. To avoid the faucet from jamming, DO flush the water pipe before installation.
4. After installation, make sure every joint is safely sealed (NO LEAKAGE).
5. Make sure to connect the hot/cold inlet pipe correctly, if standing in front, hot water pipe connecting to the left and cold water pipe connecting to the right.
6. It is recommended that installation of the product be done by a professional plumber.

Cleaning & Maintenance

To keep product clean and shiny follow the instruction below.
1. Flush with clean water and dry with soft cloth only.
2. Do not use any detergent, polisher, sane-cloth, or a scraper.
3. Do not use acid detergent.

1. Mark the positions and drill holes to suit the anchors.
2. Install the anchors and fix the shower valve into the wall. Use the air bubble level on the protective cover to ensure that the valve is
straight and level. (Important: Flush the water supply pipes to remove any dirt and deris before installing the valve body.)
3. Wrap Teflon tape around the pipe threads. Connect hot and cold water supply lines and all the in-wall pipes (not included) as
desired to the shower valve.
4.Turn on the water supply and open the cartridge. Make sure that no leakage occurs. (Note: Because the shower system has a
builtin valve, test the water pressure after the pipe connections have been made and before the finished wall material is installed.)
5. Remove the protective cover when the finished wall is completed and install the escutcheon.
6. Install the handle and diverter knob and tighten set screws with Allen key. Then, put on the indication buttons.
7. Wrap the shower arm threads with Teflon tape. Install the shower arm into the shower outlet. Then, add a rubber washer and
attach the showerhead to the shower arm.
8. Wrap the threaded end of supply elbow holder with Teflon tape and install the supply elbow holder into the handshower outlet.
9. Place rubber washers in both ends of the shower hose. Connect shower hose to the supply elbow holder and the handshower.
10. Place the handshower in the supply elbow holder.

The Size(When you break the wall to install the dual-function control valve)

Dual-functional pipe connection
1. Accordng to the product's basic Dimensional Drawings, you should create enough space for the outlet of the em bedded, water pipes,shower arm and the lower spout connector.
2. Connect the water pipes(cold and hot),the upper of the shower arm and the lower spout(hang shower)to the embedded box separately and fix them with a spanner.

Test test of water and tightness
1. Purpose:Flush the imppurities and silt in the pipe in case of the blocking
2. Open the protective plastic sheet and protective cover.Turn on the tap and Open up the supply valve rod to flush the pipe .Close the spool and test the pressure resistance and tightness to make sure there is no leakage.
3. Blocked all outlets of pipes with plastic plugs(1/2 )and turn on the tap. Check whether the connec tion port of the upper of the outlet pipe are tight and the status of pipe line pressure .Make sure there is no leakage.
4. After the test of tightness,revert the protective plastic sheet and protective cover.

Sealing wall procedure
1. Make sure the flatness of the embedde box and vertical wall with parallel ruler. If the wall is not flat, you can fix it to make sure the angle between the vertical wall is mostly close to the ideal angle of 90 degrees in order to pavetiles
2. Remove the part of the embedded box which is above the tile wall

Average rating: 5.0 based on 6 reviews
Share your thoughts with other customers
Write a review
Message Us